Foreword:
I am deep myopia. After taking off my glasses, the entire world is comparable. When you go to bed at night, you must take off your glasses. However, there are many things on my bedside, so the glasses can not be placed in a fixed position. It is very troublesome to get up in the middle of the night. Always touched glasses before, and then headlights. But since I touched the glasses and broke the second pair of glasses, I first touched the headlights. However, the bedside light buttons are not easy to find, it takes a long time to find a location.
After experiencing the smart light of RND L03, I finally can not touch it in the middle of the night. RND L03 smart light is a fun and practical intelligent night light.
Unpacking and experience:
The RND L03 fascia smart light is packaged in an environmentally friendly kraft carton. Although the cartons look thin, they are actually quite strong. The box design is also very interesting, six sides, respectively, corresponding to the six sides of the L03, and each side is a full size, this design I feel very good, manufacturers are very careful Well, point a praise!
The main parameters of the L03 are listed on the back of the package and on the back. It is very detailed. We can see that L03's material is plastic, the light source comes from LED, power is only 1.1W, with two-level dimming function.
It can be seen that the L03's shape design is very simple, but the details of the work is indeed very simple. The outer shape is designed as a seesaw shape, which is used to match the operation of the gravity sensor switch. The lampshade uses a soft light shade with a crystal texture on the surface. The back of the lampshade is subjected to a frosting process and is coated with a soft light paint, which can effectively eliminate the glare effect. Further protect our eyes. The body of the lamp body is designed in an arc shape with no edges and sharp edges and feels very good.
RND L03 Smart Light
The only interface and keys for the entire lamp body are placed on the back. Designed together and placed in the middle of a circle, it looks very monolithic. Each interface button takes up a semi-circle.
The back is marked with the rated capacity of L03, 3.6V 7.92wh. It should be 2200mAh, which is much higher than the 1800mAh written by the official website. The input is 5V1A, so the charging method is quite varied. The power adapter, mobile power supply and so on can all satisfy you.
Side should have RND's LOGO, details of the work is quite good.
The use of L03 is very simple, start the lamp after pressing the power button for 3 seconds. L03 has a two-level dimming function, so the brightness can be switched by clicking the power button again. Whether it is in the highlight mode or the normal mode, the L03's light makes me feel very soft, even if it does not look straight.
L03 is designed as a see-saw shape, which is used to determine the brightness of light by sensing different heights through gravity. This design is really awesome. In my experience, I only need to touch the lamp body and then press down on the high end. The light will instantly measure up and respond quickly. At night, the brightness of the normal mode is sufficient, and in the highlight mode, it will instantly feel dazzling to the dark eyes. Turning off the lights is also very convenient. When you turn on the lights, pressing on the high side will gradually weaken the light and then extinguish it.
Although the L03 judges the switch based on the gravity sensor, the first time it is activated by the power button is no judgment, even if the gravity switch handles the closed position. After my attempt, as long as you pay attention to the angle, you can turn on the lights on the back, so there are certain advantages. Sometimes you need to take this angle from the top down.
L03 accessories are not much, on the instructions and data lines, and non-slip noise reduction pad. According to the specifications of the charging interface, most of the power adapters are universal, so there is no impact. In particular, more and more sockets are equipped with USB charging ports. There is no power adapter but it is more convenient.
On the back of the lamp body, the position of the foot pad is reserved up and down, so long as it fits according to the position, it is firm after being attached, and it will not fall off easily.
In terms of battery life, in the normal mode, it can take more than 10 hours to fully charge one battery and 4 hours to use it in the high-light mode. It feels good enough. When charging, a red light will appear at the bottom of the lamp body, and a blue light will be displayed after it is full. The effect at night is also very good.
Dismantling:
Because I saw that there were Christmas shades for sale, I felt that the L03 must be dismantled and it should not be difficult. Therefore, I carefully searched and found that the lights did not have screws on the whole body, so they must be buckled. Around the lampshade, the lampshade can be disassembled as long as it is split from the slit.
After the lampshade is disassembled, it is the LED lamp and the mainboard. The mainboard is white and very beautiful. Below the lampboard is the battery compartment.
Lamps without a lamp are dazzling.
to sum up:
After this period of time experience, I feel that the RND L03 smart board is really easy to use, the appearance of exquisite fashion, simple and convenient operation, soft light eye protection, long-lasting life, is a very rare intelligent night light. After two days of experience for parents, they are also very satisfied. At present, L03 has been requisitioned by parents. After viewing the official website, I discovered that there are colorful versions that can adjust 16 million colors and 1700-6500K color temperature, unlike the current crystal. Love of the monochrome, colorful version more colorful.
During this period of experience, I also discovered that L03 still has some areas for improvement.
1. The material on the back of the lamp body is easy to be dirty, and the back of the lamp body is frosted. If it is dirty, it is not easy to wipe clean. I hope to use a material that is more resistant to dirt or materials that are easy to clean.
2. The lampshade is easy to grind, this can only be started from the material, and will be better if replaced with tempered glass
3. The position of the charging port and the power button does not feel too good. After charging, the power cord will get stuck and cannot be tilted. If it is perfect on the side, it can be done with the RND LOGO.
4. I hope to make more styles of lampshades, so L03 will be more playable
High Frequency PCB
High frequency PCB also called HF PCB.The RF frequency range is typically from 500 MHz to 2 GHz, and designs above 100 MHz are considered RF. The microwave frequency range is anything above 2 GHz. There`s a considerable difference between RF and microwave circuits versus typical digital and analog circuits. In essence, RF signals are very high frequency analog signals. Therefore, unlike digital, at any point in time an RF signal can be at any voltage and current level between minimum and maximum limits. We have much experience in this filed,up to 60 GHz PCB we made.
1.Made of special Resin system material with Low ER and Low loss factor
2.Hybrid Build up mix of FR4 with Low loss material3.Tight Impedance control
4.Used in Automotive, Radar, CAR to CAR communication, Distance Assistance, Active Drive Systems
We say high frequency ,also like RF PCB and Microwave PCB as they are special material too,not usual FR4 .We have Taconic,Rogers,F4B,F4BM.PTFE material in stock.With this,we can do your special boards quick turn.Unlike other suppliers need long time to purchase material.
RF PCB,RF Electronic PCB,RF Design PCB,Specialize Flex RF PCB
Storm Circuit Technology Ltd , https://www.stormpcb.com