Ultra-short focus +2800 ANSI lumens, what kind of experience is the million-star nut S2 laser television?

At present, projection can be divided into three types: traditional lamps, LEDs, and lasers because of different light sources. In these three different types of projections, laser projection is often referred to as "laser television," with better results. . Not long ago, Xiaomi Technology had launched a "Mega laser television," but unfortunately the brightness of the Mi laser TV was only 1300-1500 ANSI lumens, and the brightness did not actually reach the mainstream level in the industry. So, today, let's share a nut S2 laser television from a company that is a benchmark company in the laser television industry.

At first glance, the S2 laser TV with nuts showed a very strong metal texture. The top of the area was made of aviation-grade aluminum alloy material, and the materials used seemed very solid. At the same time, the entire surface has been subjected to oxidation wire drawing, no matter how you place it, it can show an atmosphere.

A rectangular parallelepiped design was used in the front of the Nut S2 laser TV. It looks a bit like a TV soundbar. The real body also happens to be a front stereo module that contains two 10W high quality speakers. The front of the fuselage is also printed with the brand LOGO of the nuts, and the small dot below the LOGO is the infrared receiving module, which is convenient for remote control operation.

In order to solve the problem of laser heat dissipation, nut S2 uses a large area of ​​cooling vents on both sides of the design, and through the vents can be seen vaguely on the inside of each side are designed with three cooling fans, and about a total of six DC fans can Perform more effective heat dissipation.

Friends who are familiar with the nuts will be more clear, all the projection products of the nuts have a very good sound experience in terms of sound quality, and this more flagship laser TV will naturally carry a better sound system. In fact, in order to achieve better sound quality, the metal cuboid part is actually an independent speaker module in front of the nut S2 laser television. The entire speaker part has 3297cm3 of internal space, and then with two 10W high-power external speakers, you can naturally Bring more powerful stereo sound effects.

The bare metal weight of the S2 laser TV is about 12 kg. In order to select the projection angle more conveniently, the bottom position is designed with a knob that can adjust the level. At the same time, a power switch is also designed on the right side of the fuselage to facilitate operation.

Because the S2 laser TV is mainly placed against the wall, an HDMI high-definition interface, a USB 2.0 interface, and a USB 3.0 interface are also designed to meet the daily use requirements. .

In addition, some interfaces such as a power interface, an HDMI/ARC interface, a SERVICE interface, a network interface, and an S/PDIF interface are also designed at the rear side position. To be honest, I usually play a lot of projections, but the back of these interfaces are generally difficult to use, so rich interface design, it should be able to meet the needs of various situations.

The laser light source is a projection light source that is currently used by the top projection products. It not only has higher brightness but also has a longer life.

The nut S2 laser TV is equipped with a laser light source, allowing its brightness to reach 2800 ANSI real lumens. Some people may think this number is not high. In fact, this is due to the different algorithm units. Currently, there are lamp projections or some laser projections available on the market. They all like to use the IOS lumen label. If the brightness of the nut S2 is converted to ISO lumens, the brightness can be said to reach a brightness of 9600 lumens.

Because the brightness of the nut S2 is too high, in order to prevent unnecessary damage to the human eye, a total of three such direct-view sensors are designed on both sides of the lens.

That is, under normal viewing conditions, if the nut S2 detects the presence of a person or an object, the screen projection is automatically closed to prevent the effect of direct eye sighting.

In terms of remote control, the nuts S2 uses a classic black remote control. This remote control gives people the greatest sense of technology. In addition, because it uses a minimalist design, it is still very convenient and easy to use.

In order to demonstrate the projection effect of the S2 laser TV, I changed another scene. Because the projection screen of the nuts S2 is too large, and the scene just shared to you, only suitable for 80-inch projection display below, there is no way, can only show a different scene.

The nut S2 laser TV uses a 0.65” DMD chip unit and the projection ratio is 0.17:1 ultra-short-focus projection. That is to say, the rear end of the nut S2 is 4cm away from the wall and can project a 100-inch screen. This is a lot more useful than traditional telephoto projections.After all, those traditional telephoto projections often require a distance of 2-3 meters from the wall to project a 100-inch screen, so for those who dwell, often It is only used behind the scenes, but it is very easy to place the projection directly on the human eye. If the family has children, it is even more dangerous. Therefore, the S2 laser TV is really easy to use.

Nuts S2 laser television direct window white wall effect

As mentioned earlier, the Nut S2 Laser TV has an ultra-high 2,800 ANSI lumens, plus an ultra-short focus design, so it can naturally have a good shooting effect during the day. The figure above is a scene diagram of a 100-inch white wall screen shot during the daytime window environment. You can see that the display is very clear and natural; while the picture below is a direct-to-white wall opening window and opening the living room chandelier in the daytime. Actual use, because the source of my chandeliers is yellow, so the whole wall has some yellowing, but it can also be seen that the nuts and S2 laser televisions can still be watched normally even if the windows are turned on during the daytime.

Nuts S2 laser TV daytime window + light turn direct white wall effect

What needs special note here is that when the nuts and S2 laser televisions are sold with standard 100-inch Fresnel three-way anti-light curtains, the author only shows the effect of direct-cast white walls, and the actual match with the anti-light curtains will be effective. More superior.

The imaging principle of the Nut S2 laser television is "diffuse reflection". Compared with the traditional screen light, the light source does not directly shoot the glasses, but directly hits the wall or the curtain first, and then reflects it to the human eyes, and the display screen will be softer. Therefore, even if you watch for a long time, it is not easy to cause eye strain. Therefore, this is a healthier way of watching movies. In addition to the ultra-high lumen brightness, Nut SC also has a good performance in terms of clarity. It uses 1080P full HD physical resolution, while with advanced color fluorescent color wheel, supports 1024 gray levels, so that the screen color has reached 1.7 billion colors, so the intuitive effect can be comparable to the traditional LCD TV.

Nuts S2 laser television direct window white wall effect

Moreover, you must know that these projection screens are the real effects of using white walls directly in the daytime window setting environment. Therefore, for some people to say that the "projection sees light dead" is not true in the nut S2.

Nuts S2 laser television direct window white wall effect

This time, Nuts S2 laser TV also incorporates HDR dynamic display technology, which makes the contrast of the projected picture between the light and dark picture higher, even under the dark picture, still can see more details, which is also many similar Products do not have features.

Nut S2 Laser TV Direct Investment White Wall Effect

This is just a display effect projected on a white wall. If it is combined with Fresnel's three-way light curtain, the effect will actually increase dramatically. Now that the nuts and S2 laser televisions have achieved this performance, are you still willing to use traditional TV? ?

Let's take a look at the built-in system of Nut S2 laser TV. After all, this is a product that can be used as a home entertainment center.

Nuts S2 is built on the basis of Android's deep design JMGO OS 3.0 system, the system has been upgraded several times, and now mainly in light white and fresh style, mainly in the home page up and down waterfall design, simple atmosphere, while in the home center The location can choose video center, music hall, game world, application mall and settings and other functions.

In terms of content, Nuts S2 Laser TV, like other nut products, has online video resource support such as Mango TV, iQiyi, and BesTV, and can connect with WIFI online to pursue the drama.

In addition to film and television resources, Nuts S2 laser TV also has a rich music resource built in the music hall channel. It's more like to listen to songs, and comes with a built-in dual-channel sound system that can have a very good sound quality experience. .

In the game world, you can download a variety of games, a lot of games here can use the remote control to operate, basically more suitable for use on large-screen laser television.

If you feel that the built-in resources are not enough to use, you can also download your favorite applications in the App Store. Of course, considering personalization, you can also directly use the U disk for various third-party Android games or software, rich Android ecology , so that you basically do not have to worry about resource issues.

After you have the easy-to-use JMGO system, you can enjoy yourself and lie down on the couch to watch the movie.

In addition to supporting general movies, it also supports shutter-type 3D movies, and brings in 3D glasses, so you can enjoy more realistic and vivid movie movies.

In fact, I personally prefer to watch music titles such as cross-song kings, and their sound quality is obviously much better than my previous smart TVs.

In addition to video resources, you can install some other useful software online, such as fitness or food app, you can let you exercise or learn on the big screen, which will bring a very good experience.

I prefer to play games on the big screen. The Nut S2 laser TV has a built-in quad-core processor, 2G storage and 16G storage, and it can easily run for some TV games.

If connected to a computer, you can play a variety of PC games on the Nut S2 laser TV. It is highly recommended for those game consoles. This big screen experience is only known to you if you try it yourself.

If you think that connecting the computer will be a bit tricky, you can also use the nut screen function of the S2 laser TV directly. Whether it is a computer, a mobile phone or a tablet, you can directly put it on the big screen.

Use the 100 inch screen of the Nut S2 laser TV to play the glory of the king. Don't you know that you have experienced it?

to sum up:

After a period of experience, I was able to feel the flagship charm of the Nut S2 laser television everywhere. It has an atmospheric appearance, an extreme throw ratio, a superb projection lumen, and a rich system experience, especially for affordable million-dollar prices. Also comes standard with a 100-inch Fresnel three-way light curtain, as long as you experience it once you will fall in love with this kind of lifestyle at home to enjoy a big screen. Do not know if you also like this nut S2 laser TV? If you have more questions about the Nut S2 laser television, please also welcome it. Finally thank you for your patience.