Ce Quartz UV Curing Lamp for Industrial Curing

Medical Devices Reg./Record No.: 13485
Medical Device Regulatory Type: Type 3
Medical Devices Ad. Approval No.: 188
Gold Plating: Half White Coating
Trademark: Yunsheng
Transport Package: Wooden Box
Origin: China
HS Code: 853921900

Ultraviolet high pressure mercury lamp is a kind of lighting source which use 365mm long-wave ultraviolet spectrum,lamp power density generally is 50w/cm-250w/cm,power is 500w-22kw.

 

With the improvement of manufacturing technologies and the application of high-quality materials, our UV lamp gets more and more reliable and durable. When properly installed and applied on the right UV machine, its lifetime often exceeds 1000 hours.

 

UV lamps are widely applied in the curing of uv ink, paint, varnish, plastics and glue in printing and coating technologies, such as offset printing, flexo printing, gravure printing, embossing and screen printing.

 

Wavelength

350nm to 380nm

Fill

Mercury

Input voltage

220V / 380V

Power output

120w to 36kw

Arc length

50mm to 2000mm

Lamp density

30/80/120/160/200/240/300 w/cm

Material

GE quartz glass tube

Tube Diameter

13mm to 40mm

Fill

Mercury

End caps

Ceramic / metal ( more than 100 kinds)

 

It is so easy to confirm the replacement lamp for you,just cick top "Contact Supplier" to tell us light parameters.

If you can't confirm all the information,please send the lamp to my factory,we will test it and send you the reasonable plan for replacement lamp.

TO-220 package

TO-220 Transistor Outline Package is a type of in-line package often used in high-power transistors and small and medium-sized integrated circuits.

It not only plays the role of mounting, fixing, sealing, protecting the chip and enhancing the electrothermal performance, but also connects to the pins of the package shell with wires through the contacts on the chip, and these pins pass through the wires on the printed circuit board. Connect with other devices to realize the connection between the internal chip and the external circuit.Because the chip must be isolated from the outside world to prevent impurities in the air from corroding the chip circuit and causing electrical performance degradation. On the other hand, the packaged chip is also easier to install and transport.

TO-220 package is a kind of in-line package that is often used for fast recovery diodes. TO-220AC represents a single tube with only two pins and only one chip inside.

The diodes are packaged in TO-220AC and can be used in switch mode power supplies (SMPS), power factor correction (PFC), engine drives, photovoltaic inverters, uninterruptible power supplies, wind engines, train traction systems, electric vehicles and other fields.



TO-220 package,Super Fast Recovery Rectifiers,Fast Rectifiers Diode,Ultra Fast Rectifiers

Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com