White LEDs are widely used in small liquid crystal display (LCD) panels, keyboard backlights, and indicator applications. High-brightness LEDs are used in flash sources for cell phones and digital cameras. These applications require an optimized driver solution that extends battery life and reduces printed circuit board (PCB) area and height. In these applications, common LED driver solutions involve different topologies of linear, inductive or charge pump types, each with its own characteristics. For example, the inductive solution has the best overall performance; the charge pump solution uses a low-profile ceramic capacitor that occupies minimal board area and height; the linear solution is ideal for color indicators and simple backlighting applications. ON Semiconductor offers LED driver solutions for all three types of topologies (see Figure 1) to meet different application needs.
Figure 1: Example of different LED driver topologies for low-voltage portable device applications
In terms of charge pump type solutions, ON Semiconductor offers products that support different dimming types, such as single mode, dual mode, triple mode or quad mode charge pump solutions, such as CAT3200, NCP5602, NCP5612, NCP5623, CAT3606, CAT3616, CAT3626. , CAT3603, CAT3604, CAT3614, NCP5603, etc. Take the NCP5623 as an example. This is a high-performance LED driver in a 2.0 mm × 2.0 mm × 0.55 mm LLGA-12 lead-free package. It has an I2C interface and built-in progressive dimming function. It is specially designed to drive mobile phones and other portable devices. RGB LED decorative light and enhanced LCD backlight in the product. The NCP5623 achieves 94% peak performance and less than 1 microamp standby current, extending the battery life of the portable device to the longest. For typical applications, this component combines the advantages of a very small IC package with the ability to operate with only four passive components. The module also features short-circuit and over-voltage protection to protect the system from LED failure.
It is worth mentioning that ON Semiconductor also offers a variety of four-mode charge pump LED drivers, such as CAT3636, CAT3637, CAT3604V, CAT3643, CAT3644, CAT3647, CAT3648 and NCP5604A/B. Take the CAT3648 as an example. This is a patented high-performance Quad-ModeTM fractional LED driver from ON Semiconductor that can drive up to four LEDs at 25 mA (see figure 1), the performance is as high as 92%. This four-mode driver is available in 1x, 1.33x, 1.5x, and 2x modes and is 10% more efficient than most charge-pump drivers in 1x, 1.5x, and 2x modes, and requires no additional capacitance. Take LED driver performance to the next level. These drivers are suitable for driving white LEDs in low-voltage portable devices with small-size LCD backlights and LED flash applications.
In terms of inductive boosting solutions, ON Semiconductor offers different products using PWM dimming, such as CAT32, CAT37, CAT4137, CAT4139, CAT4237, CAT4238 and NCP5005, NCP5010 with output currents between 20 mA and 50 mA, and CAT4240 (250 mA), NCP5050 (600 mA) and NCP1422 (800 mA) provide greater output current. These inductive boost drivers are suitable for driving white LEDs in low voltage portable device backlighting and flash applications.
In terms of linear backlight driver solutions, ON Semiconductor offers a variety of single-mode LED drivers for two to four channels, such as CAT4002A, CAT4002B, CAT4003B, CAT4004A, and CAT4004B. These backlight drivers offer 32 levels of dimming control with 25 mA fixed or adjustable output current and very low shutdown current of less than 1 μA with no switching power supply noise issues. These single-mode LED drivers are often used as part of a system-level approach to designing backlight circuits that integrate low-voltage LEDs with simple LED drivers. These driver circuits are simple, helping to extend battery life, reduce costs (such as saving external capacitors), and reduce noise, providing a simple solution for entry-level portable products and the low-cost handset market.
Figure 2: CAT4002B application circuit diagram
ZGAR Foggy Box 7000
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
ZGAR FB7000 Vape,ZGAR Foggy Box 7000 disposable electronic cigarette, FB7000 vape pen atomizer , FB7000 E-cig,Foggy Box 7000 disposable electronic cigarette,ZGAR Foggy Box 7000 disposable vape,zgar foggy box
Zgar International (M) SDN BHD , https://www.szvape-pods.com