The air shower is the necessary passage for people to enter the clean room. It can reduce the pollution problems caused by people entering and leaving the clean room, and reduce the large amount of dust particles brought in by the people/goods. The installation of the clean room is fully functional. The air lock chamber can reduce the number of air pollution particles. When the person/cargo passes through the air shower, the pollution particles are shot by the highly cleaned high-purity air. The high wind speed above 25m/s ensures effective spraying and floating particles. Basically filtered through the primary and high efficiency two-stage filter.
1. Purpose:
Keep the safety of the air shower and maintain the cleanliness of the clean room environment.
2, the use of air shower:
(1) Personnel entering the clean room should take off their coats in the outer dressing room and remove items such as watches, mobile phones, and accessories.
(2) Enter the inner locker room and wear clean clothes, hats, masks and gloves.
(3) After the stainless steel air shower door personnel enters the air shower room, the air shower door automatically closes the outer door immediately, and the infrared (sound control/human body heat energy) senses, the air shower automatically starts, and the air shower is 15 seconds (factory has been set). Note: When the air shower is blowing, the two stainless steel doors cannot be opened at the same time. If forced to open, the electronic lock will be damaged. The two chambers of the air shower are electronic interlock control.
(4) After the air shower is blown, push it out to enter the clean room.
3, the management of the air shower:
(1) The air shower is managed by the responsible person, and the primary filter is replaced regularly every quarter.
(2) Replace the high-efficiency filter (with partition) of the air shower every 2 years.
(3) It should be lightly opened and closed to the indoor and outdoor doors.
(4) During the use, please do not touch the switch at will, and adjust the intelligent voice prompt system.
(5) When the air shower room fails, the emergency stop switch should be turned off in time and reported to the professional maintenance personnel for repair. Under normal circumstances, the manual button is not allowed to start.
Chapter two
The role and classification of air shower
The air shower room is also called the wind shower door, the air shower channel, the air shower corridor, the air shower machine, and the air shower room. The role of the air shower is to clean the room. In the dynamic situation, the biggest source of bacteria and dust is the operator. Before the operator enters the clean room, the dust particles attached to the surface of the clothes must be blown with clean air. The role of the air brake.
Air shower room definition: It is a highly versatile local purification equipment for personnel or cargo space to enter the clean area. The fan is sprayed through the air shower nozzle and the high-efficiency filtered clean wind blows away the dust on the surface of the person or object.
According to the blowing method, the air shower room can be divided into: top air shower room, single single air shower room, single double air shower room, single three air shower room, double double air shower room, double three air shower room, multiple Double shower room, multi-person three air shower room, corner air shower room,
According to the material of the box, the air shower room can be divided into: stainless steel air shower, steel air shower, stainless steel air shower in the outer steel plate, color steel air shower, and stainless steel air shower in the outer color plate.
According to the degree of automation, the air shower can be divided into: intelligent voice air shower, automatic door air shower, explosion-proof air shower, fast rolling door air shower
Air shower room can be divided according to different objects: human shower room, cargo shower room, air shower channel, cargo shower channel
third chapter
What components are mainly included in the air shower
The air shower room/cargo shower room series is a versatile partial purification device installed between the clean room and the non-clean room. When people and goods enter the clean area, they need to be blown through the air shower. The clean air blown out can remove the dust carried by people and goods, and can effectively block or reduce the dust source from entering the clean area. The front and rear doors of the air shower/ cargo shower are electronically interlocked and act as air locks to prevent unpurified air from entering the clean area. The air shower room has a series of air shower rooms and a cargo shower room; the blowing method has a combination of single side blowing, double side blowing, top blowing and the like; the air shower door has a manual door and an automatic door. A variety of options such as fast rolling doors.
1. The air shower room is composed of several parts such as box, stainless steel door, high efficiency filter, blower, distribution box and nozzle.
2. The bottom plate of the air shower is made of steel plate bent and welded, and the surface is milky white paint.
3. The cabinet is made of high-quality cold-rolled steel plate, and the surface is electrostatically sprayed and treated. It is beautiful and elegant. The inner bottom plate is made of stainless steel plate for abrasion resistance and easy to clean.
4, the main material and dimensions of the box can be customized according to customer requirements.
The role of the air shower: the air shower is the necessary purification equipment for the personnel to enter the clean room clean room. It has strong versatility and can be used with all clean rooms and clean workshops. When the staff enters the workshop, they must pass this equipment. With strong clean air, it can be sprayed from all directions to the human body by a rotatable nozzle, effectively and quickly remove the dust, hair, hair and other debris attached to the clothes, which can reduce the movement of people into and out of the clean room. pollution problem. The two doors of the air shower are electronically interlocked, which can also function as an air lock chamber to prevent external pollution and unpurified air from entering the clean area. Eliminate the staff to bring hair, dust, bacteria into the workshop, to meet the strict dust-free purification standards of the workplace, and produce high-quality products
The role of the air shower
Air shower room is the necessary purification equipment for personnel to enter the clean room clean room. It is versatile and can be used with all clean rooms and clean workshops. When the staff enters the workshop, they must pass this equipment with strong clean air. It is sprayed from all directions to the person by a rotatable nozzle, effectively and quickly removes dust, hair, hair and other debris attached to the clothes, which can reduce the pollution problem caused by people entering and leaving the clean room. The two doors of the air shower are electronically interlocked, which can also function as an air lock chamber to prevent external pollution and unpurified air from entering the clean area. Eliminate the staff to bring hair, dust, bacteria into the workshop, to meet the strict dust-free purification standards of the workplace, and produce high-quality products.
Chapter Four
What is the purpose of the air shower?
What is the purpose of the air shower?
Air shower
It is the necessary passage for goods or people to enter and exit the clean room and at the same time function as a closed chamber of the air lock chamber. In order to reduce the large amount of dust particles caused by the ingress and egress of goods and people, the clean air stream filtered by the high-efficiency filter is sprayed from the various directions to the cargo by the rotatable nozzle, effectively and quickly removing the dust particles, and the dust particles after the removal are further The primary and high-efficiency filters are filtered and recirculated to the air shower area. In order to achieve the best results of the blowing, the air outlet of the air shower can be designed to achieve a wind speed of more than 25 m/s and a wind speed of at least 18 m/s. The air shower machine provides a modular assembly method, which can be assembled into various lengths of air shower size according to actual needs.
chapter Five
Common sense of the air shower
one,
Air shower
Introduction
Air shower room definition: It is a highly versatile part of the person or cargo space entering the clean area. The fan is sprayed through the air shower nozzle. The high-efficiency filtered clean wind blows away the dust on the surface of the person or object.
Purification equipment
.
Second, the different names of the air shower
Air shower
AIRSHOWER
Also known as wind shower, clean air shower room, purifying air shower room, air shower room, blowing room, air shower door, bath dust room, shower room, air shower channel, air shower room.
Third, air shower classification
According to the blowing method, the air shower room can be divided into: top air shower room, single single air shower room, single double air shower room, single three air shower room, double double air shower room, double three air shower room, multiple Double shower room for people, three people shower room;
According to the material of the box, the air shower room can be divided into: stainless steel air shower, steel air shower, stainless steel air shower in the outer steel plate, color steel air shower, and stainless steel air shower in the outer color plate;
The air shower room can be divided into: intelligent voice air shower room, automatic door air shower room, explosion-proof air shower room, fast rolling door air shower room according to the degree of automation;
According to the different objects, the air shower can be divided into: human shower room, cargo shower room, air shower channel, cargo shower channel.
Fourth, the structure description
1.
Air shower room consists of cabinet, stainless steel door (steel plate painted door or color steel plate door with window), coarse filter, high efficiency filter, fan, static pressure box, nozzle interlock controller, operation panel, induction device, etc. Large components.
2.
The bottom plate of the air shower is made of steel plate bent and welded, and is coated with lacquer to treat the ribs. The surface is made of stainless steel. The cabinet is made of high-quality cold-rolled steel plate, and the surface is electrostatically sprayed or painted. It is beautiful and elegant. The inner bottom plate is made of stainless steel to make it resistant to friction and easy to clean. The main material and dimensions of the cabinet can be customized according to customer requirements.
Fifth, the role of the air shower
Air shower is a person entering
Cleanroom
The purification equipment necessary for the dust-free workshop is versatile and can be used with all clean rooms and clean workshops. When the workers enter the workshop, they must pass this equipment with strong clean air from the rotatable nozzles from all directions. Sprayed onto the person, effectively and quickly remove the dust, hair, hair and other debris attached to the clothes, which can reduce the pollution caused by people entering and leaving the clean room.
The two doors of the air shower are electronically interlocked, which can also function as an air lock chamber to prevent external pollution and unpurified air from entering the clean area. Eliminate the staff to bring hair, dust, bacteria into the workshop, to meet the strict dust-free purification standards of the workplace, and produce high-quality products.
glitter keychain,luminous keychains,glitter keychain molds,keychains bulk,keychain wholesale,shiny keychain
Shenzhen Konchang Electronic Technology Co.,Ltd , https://www.konchangs.com